LORD Rubber Shock Mounts - Industrial Machinery Mounts

Max. Axial Load: 750 - 7,500 lbs (3336 - 33,362 N)

"Efficiently absorb shock and structural noise transmission from heavy industrial machinery..."

Industrial Shockmounts efficiently absorb shock and structural noise transmission from heavy industrial machinery. Adjacent controls, sensitive instruments and precision machines are protected from impact disturbances which could hamper their performance. Worker comfort is increased and building structures need less maintenance.


  • Punch Presses
  • Printing Presses
  • Metal Shears
  • Rubber Mills
  • Brakes
  • Forge Hammers

The rugged , compact design consists of a soft rubber flexing element permanently bonded to steel top and bottom plates. The specially formed top plate restrains translational movement and minimizes machine sway.

Lets Get Started!  

Quick Quote
Ask A Question
Engineering Support

Features and Benefits

  • Low profile (1-3/16" high)
  • Neoprene rubber
  • Easily installed
  • Machine stability
  • Zero maintenance
  • Through holes provided
  • Less floor fatigue
  • Reduces noise
  • May be floor mounted
  • Equipment mobility
  • Fully bonded unit
  • LORD Quality


Three standard sizes are available to support loads of 750 to 7,500 pounds per mounting. For greater loads, combinations of mountings can be used.

Industrial Shockmounts deflect 0.03" under their maximum rated load. This minimal deflection maintains machine stability. The neoprene elastomer is specially compounded to resist oil, dirt and most adverse industrial environments. No maintenance is required and long service life is assured.

The low profile design (1 -3/16" height) requires minimallifting of machinery that results in a 1-3/16" shift ofthe machine's center of gravity. The top plate is tapped to accept a standard 5/8-11 bolt.

Through holes are provided on each side of its bottom plate extension for bolting the shockmount to the floor.

Use the illustration and table below to help choose the right mount for your application.